Siemens washer dryer error codes
All 6 Siemens washer dryer fault codes, what each one means, and what to do about it. These codes are shared with Bosch and Neff.
- E17The machine did not fill with water within the expected timeDIY fix
- E18The machine could not drain the water out within the expected timeDIY fix
- E23Aquastop triggered — water has been detected in the base of the machineNeeds engineer
- F16The door is not closed, or the machine cannot confirm that it isDIY fix
- F21Drum drive fault — the motor is not turning the drum as commandedNeeds engineer
- F43The drum did not reach the speed the board asked forDIY with care
Need an engineer for this?
We list 4 washer dryer repair businesses across the UK, 3 of which are Siemens-authorised. Diagnostic callouts typically start around £55, and many will put that towards the repair if you go ahead.
- 01463 791822Inverness
- 01823 669616Taunton
- 01903 779 334AngmeringSame day
No code on the display?
Find the fault by what the washer dryer is doing instead.
- Washing machine won't spin and the drum is full of water
- Washing machine won't drain the water away
- Washing machine won't fill with water
- Washing machine door won't open
- Washing machine isn't heating the water
- Washing machine is leaking water
- Washing machine is very loud on spin
- Washing machine won't start