Hotpoint washer dryer error codes
All 6 Hotpoint washer dryer fault codes, what each one means, and what to do about it. These codes are shared with Indesit and Ariston and Whirlpool.
- F02The motor speed sensor is not reporting back to the control boardNeeds engineer
- F03The water temperature sensor has failed or its circuit is brokenNeeds engineer
- F05The machine could not drain, or the level sensor never saw the water leaveDIY fix
- F06The control board is not getting the button or door signals it expectsDIY with care
- F08Heating fault — the heater relay or the element circuit has failedNeeds engineer
- H20The machine is not filling with water, or not filling fast enoughDIY fix
Need an engineer for this?
We list 4 washer dryer repair businesses across the UK, 2 of which are Hotpoint-authorised. Diagnostic callouts typically start around £55, and many will put that towards the repair if you go ahead.
- 01823 669616Taunton
- 01903 779 334AngmeringSame day
- 01463 791822Highland Appliance ServicesVerifiedInverness
No code on the display?
Find the fault by what the washer dryer is doing instead.
- Washing machine won't spin and the drum is full of water
- Washing machine won't drain the water away
- Washing machine won't fill with water
- Washing machine door won't open
- Washing machine isn't heating the water
- Washing machine is leaking water
- Washing machine is very loud on spin
- Washing machine won't start